Wednesday 10 October 2012

Scream For Me Tut PTU



Materials

"Scream For Me" scrapkit by WitchysHeart purchased HERE
"Karni  Mata" tube by Gabi Spree purchased HERE
DBV Mask 112 available HERE
FM Tiletools blend emboss

Tutorial

Use FM Tiletools blend emboss as required. I always use blend emboss on each layer with the following settings:-



  • Open new canvas 800 x 800. Selections, select all. Copy and paste paper 10 into selection. Selections, select none. Layers, new mask layer, apply mask. Layers, merge, merge group.
  • WH-Roses#1 copy and paste as new layer. Image, resize 70%. Place top right. Layers, arrange, send to bottom. Erase lower part of the stem.
  • WH-DeadBush#1 copy and paste as new layer. Image, resize 70%. Place bottom right of mask. Layers, arrange, send to bottom.
  • WH-Moon copy and paste as new layer. Image, resize 50%. Place top right. Change blend mode to hard light.
  • WH-Spooky Tree#2 copy and paste as new layer. Image, resize 70%. Image, mirror. Place top right.
  • WH-Cloud#2 copy and paste as new layer. Move upwards and to the left. Change blend mode to dissolve.
  • WH-Sign copy and paste as new layer. Image, resize 50%. Place top right.
  • WH-Haunted House copy and paste as new layer. Image, resize 60%. Image, mirror. Move slightly to the left.
  • WH-Frame#2 copy and paste as new layer. Image, resize 50%. Image, rotate, free rotate 90 right.Move to top right. Layers, duplicate. Image, resize 50%. Move to top left.
  • Tube copy and paste as new layer. Image, resize 90%. Move below large frame.
  • Tube using crop tool select hand section and crop. Copy and paste as new layer.Place below small frame. erase the parts of the tube that aren't required. Layers, duplicate. Layers, arrange, bring to top.
  • WH-Spooky Tree#1 copy and paste as new layer. Image, resize 90%. Erase bottom of the trunk below the frame level.
  • Highlight WH-Dead Bush#1 layer.Layers, duplicate. Image, mirror. Layers, arrange, bring to top. Place bottom left.
  • WH-Skulls#1 copy and paste as new layer. Image, resize 35%. Place bottom left.
  • WH-Fog#1 copy and paste as new layer. Image, resize 70%. place top centre of image. Change opacity to 72.

  • WH-Barbed Wire w -blood copy and paste as new layer. Place across bottom of large frame. Erase any excess.
  • WH-Candle#2 copy and paste as new layer. Image, resize 30%. Place on edge of large frame. Erase bottom section.
  • Highlight tube layer. Layers, duplicate. layers, arrange, bring to top.
  • WH-Light#1 copy and paste as new layer. Image, resize 25%. Image, mirror. Place right centre.
  • WH-Spider#1 copy and paste as new layer. image, resize 25%. Place bottom left.
  • WH-Owl copy and paste as new layer. Image, resize 20%. Place top right.
  • Add © and text. Layers, merge, merge visible.
         ©Sheila V Phoenix 15th October 2012








Striptease Tut PTU




Materials

"Striptease" scrapkit by Niqui's Designs purchased HERE
"Kerska" tube by Ange10 purchased HERE
MC Mask 16 by MelissazCreationz available HERE
MC Mask 10 by MelissazCreationz available HERE
FM Tiletools blend emboss
Toadies Ommadawn

Tutorial

Use FM Tiletools blend emboss as required. I always use blend emboss on each layer with the following settings:-




  • Open new canvas 800 x 800. Selections, select all. Copy and paste paper 12 into selection. Selections, select none. Layers, new mask layer, apply MC Mask 16. Layers, merge, merge group. Image, mirror. Move towards top of tag. Change blend mode to multiply.
  • Layers, new raster layer. Selections, select all. Copy and paste el28 into selection. Selections, select none. Effects, plugins. Apply Toadies Ommadawn with the following settings:-

  • Layers, new raster layer. Selections, select all. Copy and paste el29 into selection. Selections, select none. Effects, plugins. Apply Toadies Ommadawn with the above settings. Image, rotate, free rotate 90 right.
  • El17 copy and paste as new layer. Image, resize 110%. Move up slightly
  • El43 copy and paste as new layer. image, resize 60%. Place top left.
  • Layers, new raster layer. Selections, select all. Copy and paste el58 into selection. Layers, new mask layer, apply MC Mask 10. Layers, merge, merge group. Change blend mode to colour legacy.
  • Layers, new raster layer. Floodfill with colour 040404. Layers, new mask layer, apply MC Mask 10. Layers, merge, merge group. Change opacity to 54. Layers, duplicate. Change opacity to 100 and blend mode to burn.
  • El38 copy and paste as new layer. Image, resize 80%. Move slightly upwards.
  • El 59 copy and paste as new layer. Change blend mode to screen.
  • El34 copy and paste as new layer. Image, resize 120%.
  • El18 copy and paste as new layer. Image, resize 65%. Place across top of tag.
  • El55 copy and paste as new layer.Place off centre to the left.
  • El54 copy and paste as new layer. Image, resize 75%. Place to left.

  • El16 copy and paste as new layer. Image, resize 80%. Place bottom left.
  • El5 copy and paste as new layer. Image, resize 46%. Image, rotate, free rotate 45 right. Place bottom centre.
  • Tube copy and paste as new layer. Image, resize 90%. Place on right.
  • El3 copy and paste as new layer. Image, resize 80%. Image, rotate, free rotate 45 right. Place across arm of tube.
  • Highlight tube layer. Layers, duplicate. Layers, arrange, bring to top. Erase so handle of whip is visible
  • El13 copy and paste as new layer. Image, resize 25%. Place on large drum.
  • El10 copy and paste as new layer. Image, resize 70%. Place bottom left.
  • El35 copy and paste as new layer. Image, resize 55%. Image, mirror. Place bottom left.
  • El39 copy and paste as new layer. Image, resize 115%. Image, mirror. Place across bottom.
  • El14 copy and paste as new layer. Image, resize 60%. Place bottom right.
  • El50 copy and paste as new layer. Image, resize 50%. Image, mirror. Place bottom right.
  • El12 copy and paste as new layer. Image, resize 55%. Place bottom centre.
  • Highlight both tube layers and erase any excess at the bottom.
  • El45 copy and paste as new layer. Image, resize 80%. Place top centre.
  • Add © and text. Layers, merge, merge visible.
         ©Sheila V Phoenix 15th October 2012




Monday 1 October 2012

Gothic Inspirations Blog Train ... Pick Your Poison

The Blog Train has now left the station. Be sure to visit all blogs for each portion. My contribution is a sampler to a full size kit that I will be releasing soon ..



                                              My contribution can be found HERE

Other blogs to visit:-


Jo with: A Taggers Scrap 

Muriel with: Creative Disorder Scraps 

Stuart with: Creative Crazy Scraps 

Sarah with: Designs By Sarah  

Miriam with: Ellanoir Design 

Jessica with: Gothic Inspirations 

Victoria with: Maitri Scraps 

Kimmy with: My Creative Muse 

Jennifer with: Perfectly Imperfect Creationz 

Tiffany with: SSCC Graphic Solutions 

Kara with: Sweet Cravings Scraps 

Tasha with: Tasha's Playgrounds 

Alyson with: Tyger’s Tidbits 

Christina with: Tragedy's Creationz



Michele with: http://wwwalwayscreations.blogspot.co.uk/

Tags made with my sampler:-




Sunday 30 September 2012

Misery Tut PTU



Materials

"Misery" scrapkit by Black Widow Creationz purchased HERE
"Boo-Nita" tube by Alicia Mujica purchased HERE
Niks "Orbital View" mask purchased HERE
FM Tiletools blend emboss
MuRas Meister copies

Tutorial

Use FM Tiletools blend emboss as required. I always use blend emboss on each layer with the following settings:-




  • Open new canvas 800 x 800. Selections, select all. Copy and paste paper 18 into selection. Selections, select none. Layers, new mask layer, apply mask. Layers, merge, merge group. Change blend mode to difference.
  • Gltter Spat1 copy and paste as new layer. Image, resize 120%. Place top right. Layers, arrange, send to bottom. Layers, duplicate. Image, flip. Layers, duplicate. Image, mirror. Image, flip.
  • RoseVines2 copy and paste as new layer. Image, rotate, free rotate 90 left. Image, resize 50%. Effects, plugins, MuRas Meister copies with the following settings:-

  • Image, resize 130%.
  • BrokenHeart2 copy and paste as new layer. Image, rotate, free rotate 90 left. Image, resize 50%. Effects, plugins, MuRas Meister copies. (settings as above). Image, resize 130%. Highlight rosevines layer and erase any part inside the frame.
  • RoseVines1 copy and paste as new layer. Image, resize 120%.Place top right. Move below frame and erase any part inside the frame. Layers, duplicate. Image, flip. Image, mirror.
  • Highlight frame layer and using magic wand click inside. Selections. modify. expand by 5. Layers, new raster layer, copy and paste paper 17 into selection. Selections, select none. Move below frame layer. Change blend mode to exclusion.
  • HeartCross2 copy and paste as new layer. Image, resize 90%. Place on right side of frame.
  • DeadTree1 copy and paste as new layer. Image, resize 130%. Place top left.
  • Tube copy and paste as new layer. Resize as required. Move down below frame layer and erase any excess. Layers, duplicate. Layers, arrange, bring to top. Erase excess.
  • Feather2 copy and paste as new layer. Image, resize 75%. Place bottom left of frame.
  • Flower7 copy and paste as new layer. Image, rotate, free rotate 90 left. Image, resize 70%. Place bottom left of frame.
  • Candle4 copy and paste as new layer. Image, resize 130%. Place bottom left.
  • BrokenHeart2 copy and paste as new layer. Image, resize 50%. Place bottom right of frame.    Layers, duplicate. Image, resize 75%. Move to left. Layers, duplicate. Image, resize 75%. Move to between the 2 hearts.
  • Staples copy and paste as new layer. Place on top of flower. 
  • Add © and text. Layers, merge, merge visible.
         ©Sheila V Phoenix 30th September 2012



Wednesday 26 September 2012

Gothic Obsession Tut PTU



Materials

"Gothic Obsession" scrapkit by Crystals Scrap Creations purchased HERE
"Snow Black" tube by Kittrose purchased HERE
MC_Mask13 by Melissaz Creationz HERE
DBV Mask 113 by Designs by Vaybs HERE
FM Tiletools blend emboss
MuRas Meister copies

Tutorial

Use FM Tiletools blend emboss as required. I always use blend emboss on each layer with the following settings:-




  • Open new canvas 800 x 800. Selections, select all. Copy and paste paper 8 into selection. Selections, select none. Layers, new mask layer, apply mask (MC_Mask 13). Layers, merge, merge group. Change blend mode to difference.
  • Layers, new raster layer. Selections, select all. Copy and paste paper 2 into selection. Selections, select none. Layers, new mask layer, apply mask (DBV Mask 113). Layers, merge, merge group.
  • gothic e24 copy and paste as new layer. Image, resize 115%.
  • gothic e36 copy and paste as new layer. Image, resize 135%. Image, mirror. Place top right.
  • gothic e29 copy and paste as new layer. Image, resize 50%. Effects, plugins, MuRas Meister copies with the following settings:- 

  • Image, resize 130%. Change blend mode to burn.
  • gothic e16 copy and paste as new layer. Image, resize 135%.  Place on left. Layers, duplicate. Image, mirror. Place top right.
  • gothic e7 copy and paste as new layer. Move slightly to the right. Change blend mode to difference.
  • gothic e21 copy and paste as new layer. Image, rotate, free rotate 90 left. Image, resize 110%. Place across bottom.
  • gothic e22 copy and paste as new layer. Image, resize 50%. Effects, plugins, MuRas Meister copies (settings as above), Image, resize 140%. Layers, duplicate.


  • gothic e3 copy and paste as new layer. Image, resize 120%.
  • tube copy and paste as new layer. Erase excess on left side and erase round fingers.
  • gothic e35 copy and paste as new layer. Place on right. Erase bottom part of element.
  • gothic e40 copy and paste as new layer. Place across bottom.
  • gothic e27 copy and paste as new layer. Image, resize 70%. Place bottom right.
  • Highlight tube layer. Layers, duplicate. Layers, arrange, bring to top. Erase any excess.

  • gothic e26 copy and paste as new layer. Image, resize 60%. Image, mirror. Place bottom right.
  • gothic e4 copy and paste as new layer. Image, resize 80%. Place bottom left.
  • Add © and text. Layers, merge, merge visible.
         ©Sheila V Phoenix 30th September 2012




Season of the Witch Tut PTU


Materials

"Season of the Witch" scrapkit by WitchysHeart purchased HERE HERE HERE HERE
DBV mask 112 available HERE
Tube "Sexy Witch" by Alehandra Vanhek purchased HERE
FM Tiletools blend emboss

Tutorial

Use FM Tiletools blend emboss as required. I always use blend emboss on each layer with the following settings:-




  • Open new canvas 800 x 800. Selections, select all. Copy and paste paper 3 into selection. Selections, select none. Layers, new mask layer, apply mask. Layers, merge, merge group. Layers, duplicate.
  • WH Blood moon with Clouds copy and paste as new layer. Image, resize 75%. Place top right.
  • WH Rusted Mesh copy and paste as new layer. Place bottom right. Layers, duplicate. Image, mirror. Image, flip.
  • WH Vines copy and paste as new layer. Place bottom left. Layers, duplicate. Image, mirror.
  • WH Magic Ball copy and paste as new layer. Image, resize 90%. Change blend mode to dissolve and opacity to 70.
  • WH Tarot Cards copy and paste as new layer. Image, resize 85%. 
  • WH Tree2 copy and paste as new layer. Image, resize 80%. Place top left.
  • WH haunted House copy and paste as new layer. Image, resize 67%. Using deformation tool stretch image upwards and downwards. Change blend mode to hard light.
  • WH Fog copy and paste as new layer. Change blend mode to dodge.
  • WH Clouds copy and paste as new layer. Image, resize 110%. Move to top of image.
  • WH Bats copy and paste as new layer. Image, mirror. Image, resize 45%. Place top left.

  • WH Spellbook1 copy and paste as new layer. Image, resize 65%. Image, rotate, free rotate 20 left. Place bottom left.
  • WH Cauldron2 copy and paste as new layer. Image, resize 45%. Place bottom right.
  • WH Witch Sign copy and paste as new layer. Image, resize 65%. Place bottom right.
  • Tube copy and paste as new layer. Resize as required.
  • WH Red Rose and Barbed Wire copy and paste as new layer. Place across bottom.
  • WH Spider2 copy and paste as new layer. Image, resize 30%. Image, rotate, free rotate 20 left. Place bottom left.
  • WH Lantern copy and paste as new layer. Image, resize 35%. Place bottom left.
  • WH Cat3 copy and paste as new layer. Image, resize 45%. Place bottom right.
  • Highlight tube layer and erase any excess.
  • Add © and text. Layers, merge, merge visible.
         ©Sheila V Phoenix 26th September 2012



Tuesday 25 September 2012

Dark Symphony Tut PTU


Materials

"Dark Symphony" scrapkit by Bibi purchased HERE
Swirly mask of own choice
FM Tiletools blend emboss

Tutorial

Use FM Tiletools blend emboss as required. I always use blend emboss on each layer with the following settings:-




  • Open new canvas 800 x 800. Selections, select all. Copy and paste paper 4 into selection. Selections, select none. Layers, new mask layer, apply mask. Layers, merge, merge group.
  • Element 58 copy and paste as new layer. Image, mirror.
  • Element 7 copy and paste as new layer. Place across top of mask layer.
  • Element 35 copy and paste as new layer. Image, resize 50%. place bottom left.
  • Element 71 copy and paste as new layer.
  • Element 74 copy and paste as new layer. Image, resize 35%. Place top left.
  • Element 9 copy and paste as new layer. Image, rotate, free rotate 20 right. Place top right.
  • Element 19 copy and paste as new layer. Image, resize 45%. Place bottom right.
  • Element 33 copy and paste as new layer.
  • Element 6 copy and paste as new layer. Image, resize 75%. Place across bottom.
  • Element 2 copy and paste as new layer. 
  • Element 34 copy and paste as new layer. Image, resize 50%. Place bottom right.
  • Add © and text. Layers, merge, merge visible
        ©Sheila V Phoenix 25th September 2012


Monday 24 September 2012

Night Terrors PTU Tut


Materials

"NightTerrors" scrapkit by WitchysHeart purchased HERE
"Beaute Capturee"tube by Joahannah von Frankenstein Purchased HERE
Niks orbital view mask purchased HERE
FM Tiletools blend emboss

Tutorial

Use FM Tiletools blend emboss as required. I always use blend emboss on each layer with the following settings:-


  • Open new canvas 800 x 800.
  • WH-Mesh copy and paste as new layer. Effects, geometric effects, perspective horizontal 60, transparent. Change opacity to 18.
  • Layers, new raster layer. Selections, select all. Copy and paste paper 4 into selection. Selections, select none. Layers, new mask layer, apply mask. Layers, merge, merge group.
  • WH-Beware Rock copy and paste as new layer. Image, resize 35%. Place bottom middle.
  • WH-Tombstone copy and paste as new layer. Image, resize 70%. Place bottom left.
  • WH-Candle1 copy and paste as new layer. Image, resize 70%. Place alongside tombstone and erase bottom part of candle.
  • WH-Blood Splatter3 copy and paste as new layer. Image, resize 70%. Place top centre.
  • WH-Half Skeleton copy and paste as new layer. Image, resize 50%. Place on top of tombstone.
  • WH-Leaves copy and paste as new layer. Image, resize 80%. Place across bottom.
  • WH-Grass copy and paste as new layer. Image, resize 90%. Place across bottom of tombstone.
  • WH-Fog copy and paste as new layer. Place on top of blood splatter.
  • WH-Dead Tree2 copy and paste as new layer. Effects, geometric effects, perspective horizontal 60, transparent. Place top right.
  • WH-Skeleton Hanging copy and paste as new layer. Image, resize 205. Place top left.
  • WH-Zombie1 copy and paste as new layer. Image, mirror. Image, resize 90%. Effects, geometric effects, perspective horizontal 60, transparent. Place bottom right.
  • WH-Bat2 copy and paste as new layer. Image, resize 20%. Place top left. Layers, duplicate. Image, rotate, free rotate 20 left. Place in middle of tag.
  • WH-Spider copy and paste as new layer. Image, resize 40%. Place bottom of tag.
  • WH-Noose copy and paste as new layer. Image, resize 25%. Hang from tree. Layers, merge, merge visible. Image, resize 60%. Place top right. Close layer.

  • WH-Heart with Blood copy and paste as new layer. Image, resize 60%. move to right.
  • Layers, new raster layer. Selections, select all. Copy and paste paper 4 into selection. Selections, select none. Layers, new mask layer, apply mask. Layers, merge, merge group.
  • WH-Frame2 copy and paste as new layer. Image, resize 50%. Place bottom left.
  • WH-Knife1 copy and paste as new layer. Image, resize 50%. Place to side of frame.
  • WH-Hands copy and paste as new layer. Image, resize 60%. Place on top of knife.
  • WH-Cloud copy and paste as new layer. Image, resize 75%. Place across top of hands.
  • Open merged layer. Layers, arrange, bring to top. Place on top of cloud.
  • WH-Barbed Wire2 copy and paste as new layer. Image, resize 60%. Place across bottom of merged layer.
  • WH-Chain with Cuff copy and paste as new layer. Image, resize 60%. Place bottom right. Erase any part that is above the barbed wire.

  • Tube copy and paste as new layer. Image, mirror. image, resize 75%. Place below frame layer. Erase any excess. Layers, duplicate. Layers, arrange, bring to top.
  • WH-Black Rose2 copy and paste as new layer. Image, resize 10%. Layers, duplicate. Repeat until you have 4 roses. Place around bottom of frame. 
  • Add © and text. Layers, merge, merge visible.
          ©Sheila V Phoenix 25th September 2012





Wednesday 19 September 2012

Mistress of the Night Tut PTU


Materials

"MistressoftheNight" scrapkit by Karra purchased HERE
"Cordelia" tube by Obviously Cloe purchased HERE
Masks available HERE
FM Tiletools blend emboss
Alien Skin Eye Candy 5 Impact glass

Tutorial

Use FM Tiletools blend emboss as required. I always use blend emboss on each layer with the following settings:-




  • Open new canvas 800 x 800. Selections, select all. Copy and paste paper 13 into selection. Selections, select none. Layers, new mask layer, apply TMGrunge mask. Layers, merge, merge group. Change blend mode to burn.
  • kk moon copy and paste as new layer. Place top left. Layers, arrange, send to bottom.
  • kk tree copy and paste as new layer. Image, mirror. Move to top right. Layers, arrange, send to bottom.
  • kk frame 3 copy and paste as new layer. Image, resize 130%. Place on the right. Using magic wand click inside the frame. Selections, modify, expand by 5. Layers, new raster layer. Copy and paste paper 13 into selection. Selections, select none. Apply Eye Candy glass (watery, default settings). Move this layer below the frame. Change blend mode to dodge.
  • kk frame 3 copy and paste as new layer. Image, resize 80%. Image, rotate, free rotate 20 left. Place on the left. Using magic wand click inside the frame. Selections, modify, expand by 5. Layers, new raster layer. Copy and paste paper 13 into selection. Selections, select none. Apply Eye Candy glass (watery, default settings). Move this layer below the frame. Change blend mode to dodge.
  • kk web copy and paste as new layer. Image, resize 70%. Place on top of moon. Change blend mode to burn.
  • kk clouds copy and paste as new layer. Place across moon and top of frame. Change blend mode to luminance (L).
  • Layers, new raster layer. Selections, select all. Copy and paste paper 9 into selection. Selections, select none. Layers, new mask layer, apply jillmask. Layers, merge, merge group. Change blend mode to difference.
  • kk silhouette 1 copy and paste as new layer. image, resize 80%. Image, rotate, free rotate 40 left. Place on top of smaller frame and erase any excess. Change blend mode to hard light.
  • kk branch copy and paste as new layer. Place across bottom of frames.

  • kk ivy copy and paste as new layer. Image, resize 70%. Place between the 2 frames. Change blend mode to luminance(L) and opacity to 90.
  • kk leaves copy and paste as new layer. Image, resize 60%. Image, mirror. Place bottom right of large frame. Layers, duplicate. Place bottom left of large frame. layers, duplicate. Image, mirror. Place bottom middle of large frame. 
  • kk safety pin copy and paste as new layer. Place across leaves.
  • kk leaves copy and paste as new layer. Image, resize 40%. Place bottom right of smaller frame. Layers, duplicate. Image, mirror. Place bottom left of frame.
  • kk rose1 copy and paste as new layer. Image, resize 22%. Place bottom left of smaller frame. Layers, duplicate. Place middle of larger frame,
  • tube copy and paste as new layer. Resize as required. Move to below large frame layer and erase any excess. Layers, duplicate. Move to above frame layer.
  • kk cat1 copy and paste as new layer. Image, resize 60%. Place bottom right.
  • kk mask copy and paste as new layer. Image, resize 40%. Place between roses.
  • kk spider1 copy and paste as new layer. Image, resize 20%. Place in web.
  • kk bats copy and paste as new layer. Image, resize 25%. Place top left.
  • Add © and text. Layers, merge, merge visible.
        ©Sheila V Phoenix 19th September 2012







Sunday 16 September 2012

Sealife Tut PTU



Materials

"Sealife" scrapkit by AmyMarie purchased HERE
Tube "Mermaid 1" by Scrapper's Delights purchased HERE
Niks orbital view mask purchased HERE
FM Tiletools blend emboss

Tutorial

Use FM Tiletools blend emboss as required. I always use blend emboss on each layer with the following settings:-




  • Open new canvas 800 x 800. Selections, select all. Copy and paste paper 13 into selection. Selections, select none. Layers, new mask layer, apply mask. Layers, merge, merge group.
  • net copy and paste as new layer. Image, mirror. Image, resize 140%.
  • el065 copy and paste as new layer. Image, resize 170%. Move to bottom right. Change blend mode to burn.
  • el5 copy and paste as new layer. Place bottom right. Layers, duplicate. Image, mirror.
  • el036 copy and paste as new layer. Image, resize 140%. Place top left. Change opacity to burn.
  • el056 copy and paste as new layer. Move to upper right.
  • palm tree1 copy and paste as new layer. Move to upper right.
  • palm tree 12 copy and paste as new layer. Image, mirror. Move to upper left.
  • waves2 copy and paste as new layer. Image, resize 125%. Place across palm tree.
  • el015 copy and paste as new layer. Image, mirror. Place bottom left.
  • waves3 copy and paste as new layer. Image, resize 140%. Image, mirror. Place bottom right. Change blend mode to burn.
  • el033 copy and paste as new layer. Image, resize 145%. Place across bottom.
  • sl4 copy and paste as new layer. Move to bottom right.
  • el058 copy and paste as new layer. Image, resize 120%. Move to bottom right.
  • p2 copy and paste as new layer. Image, resize 120%. Place bottom left.

  • el018 copy and paste as new layer. Image, resize 50%. Image, mirror. Place bottom right.
  • el059 copy and paste as new layer. Image, resize 50%. Place bottom left.
  • bottle copy and paste as new layer. Image, resize 65%. Place bottom left.
  • el032 copy and paste as new layer. Place top left.
  • tube copy and paste as new layer, Resize as required.
  • el026 copy and paste as new layer. Image, resize 50%. Place bottom left.
  • crab copy and paste as new layer. Image, resize 50%. Image, rotate, free rotate 40 left. Place bottom right.
  • el046 copy and paste as new layer. Image, mirror. Place bottom left.
  • Add © and text. Layers, merge, merge visible.
         ©Sheila V Phoenix 19th September 2012




Thursday 13 September 2012

Dark Mood Tut PTU



Materials

"Dark Mood" scrapkit by Scrapper's Delights purchased HERE
Gems mask 116 found HERE
FM Tiletools blend emboss
Muras Meister copies

Tutorial

Use FM Tiletools blend emboss as required. I always use blend emboss on each layer with the following settings:-




  • Open new canvas 800 x 800. Selections, select all. Copy and paste paper 9 into selection. Selections, select none. Layers, new mask layer, apply mask. Layers, merge, merge group. 
  • Element 86 copy and paste as new layer. Image, rotate 90 right. Place at bottom of tag.
  • Element 94 copy and paste as new layer. Image, resize 80%. Place at bottom of tag.
  • Element 9 copy and paste as new layer. Image, resize 65%.
  • Element 83 copy and paste as new layer. Place bottom right.
  • Element 12 copy and paste as new layer. Image, resize 40%. place middle of tag on the right. Change opacity to 42. Layers, duplicate. Image, mirror. Move to the top left of tag.
  • Element 28 copy and paste as new layer. Image, resize 30%. Apply Mura's meister copies with the following settings:-

  • Image, resize 130%. Layers, duplicate. Change blend mode to multiply. Layers, duplicate.
  • Element 102 copy and paste as new layer. Image, resize 70%. Image, mirror.
  • Element 55 copy and paste as new layer. Image, resize 50%. Place on right side of frame.
  • Element 39 copy and paste as new layer. Image, resize 20%. Place on top of bow.
  • Element 62 copy and paste as new layer. Image, resize 30%. Image, rotate, free rotate 45 right. Place bottom right of tag.
  • Add © and text. Layers, merge, merge visible.
          ©Sheila V Phoenix 13th September 2012